Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card Uživatelský manuál stáhnout pdf

Quick Start Guide ONLY for Encore/ST G4 1.8 GHz

%.#/2%



34''(Z

0ROCESSOR5PGRADE#ARDFOR0OWER-AC



'#OMPUTERS

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.

Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com

Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350

©2008 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype and Encore are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks

of Apple Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.

QS-SG4-1800-E-B-010708

Power Mac and Operating System Compatibility

This Encore/ST G4 processor upgrade card is compatible only with Power

Mac

G4 AGP Graphics, Gigabit Ethernet, Digital Audio, QuickSilver 2001, and

QuickSilver 2002 models. Installation of this product into a Power Mac G4 Cube is

not supported. If you are unsure which Power Mac model you have, refer to

Apple’s online support article that describes the differences at

http://docs.info.apple.com/article.html?artnum=58418. This article

lists model numbers, and describes the physical differences of the various

Power Mac G4 models.

At this printing, this Encore/ST G4 processor upgrade is compatible with

Mac OS

9.2 and Mac OS X Version 10.3.5 and later. For up-to-date Mac

OS compatibility information, check our web site.

The Encore/ST G4 supports hard disk and display sleep in all compatible Power

Mac G4 computers; in some conﬁgurations, deep sleep may not be supported.

You Should Have

The following items should be included in your product package:

• Encore/ST G4 processor upgrade card*

• Sonnet Installer CD

The following items are required for installation:

• Medium Phillips screwdriver

• Flat blade screwdriver (only for QuickSilver installation)

• Needle-nose pliers

Multiple Upgrade Recommendation

If you intend to perform multiple hardware upgrades to your Power Mac, we

recommend that you complete the installation of the Encore/ST G4 ﬁrst, and

then install the remaining upgrades; complete each upgrade and test it before pro-

ceeding to the next.

* Your card may differ from what is pictured.

Support Notes: Please familiarize yourself with

the following instructions before beginning the

installation. If you feel you are unable to install the com-

puter hardware, please contact a qualified computer

technician. Sonnet strongly recommends that a qualified

technician perform this installation.

Before proceeding with the installation, we recommend

that you make a backup of important information on your

hard drive prior to installing new hardware or software.

WARNING: In order for this Encore/ST G4

to operate in your system, it must have the

latest Power Mac G4 firmware. If you use Mac

OS X, you must ensure that it is Version 10.3.5

or later; earlier versions are NOT compatible. If

your system does not meet these criteria, you must

upgrade to the correct OS version(s) and update

your system’s firmware before installing this upgrade.

Otherwise, your system will not operate with the

Encore/ST G4 installed. Instructions follow.

1 2 3 4 5 6 ... 14 15

Shrnutí obsahu

Strany 1 - '(Z

Quick Start Guide ONLY for Encore/ST G4 1.8 GHz %.#/2%»34''(Z0ROCESSOR5PGRADE#ARDFOR0OWER-AC'#OMPUTERSRemember to regi

Strany 2

8Figure 22Installation—Digital Audio ModelsInstall Encore/ST G4 Processor Upgrade Card 1. Remove the Encore/ST G4 processor upgrade card from its ant

Strany 3 - Install Software… FIRST

9Figure 26Installation—Digital Audio ModelsClose Computer 1. Raise the side panel back into place (Figure 26). 2. Return the computer to your compu

Strany 4 - Install Software… First!

10Figure 30Figure 29Figure 28Figure 27security lockport access coverside panelraise release latchscrew screwInstallation—QuickSilver 2001 and 2002 Mod

Strany 5 - AGP Graphics/Gigabit Ethernet

11Figure 34Figure 33Figure 32Figure 31screwheat sinkscrewprocessor cardclipclipprocessor cardscrewfan assembly2-pin connectorprocessor cardInstallat

Strany 6 - Remove Processor Card

12Figure 36Figure 35Installation—QuickSilver 2001 and 2002 ModelsInstall Encore/ST G4 Processor Upgrade Card 1. Remove the Encore/ST G4 processor upg

Strany 7

13Figure 45Installation—QuickSilver 2001 and 2002 ModelsReinstall Fan Assembly and Close Computer 1. Place the fan assembly between the Encore/ST ca

Strany 8 - Shut Down and Open Computer

This page left intentionally blank.

Strany 9

1Software/Firmware InfoInstall Software… FIRSTFigure 3A. AGP Graphics, Gigabit Ethernet, and Digital Audio Users ONLY—Verify and Update Power Mac Fir

Strany 10 - Figure 25

2Install Software… First! C. MAC OS X USERS—Install Sonnet Firmware PatchThis section describes the installation of software required to sup-port this

Strany 11 - Digital Audio

3This section covers the installation of the Encore/ST G4 into Power Mac G4 AGP Graphics and Gigabit Ethernet models. If you are install-ing this prod

Strany 12 - Remove Fan Assembly

4Figure 9Figure 8screwscrewprocessor cardscrewanti-static packageEncore/ST G4 cardInstallation—AGP Graphics and Gigabit Ethernet ModelsRemove Processo

Strany 13 - QuickSilver 2001/2002

5Figure 13Figure 12Encore/ST cardscrewscrewInstallation—AGP Graphics and Gigabit Ethernet Models 5. Making sure the Encore/ST card’s captive screws a

Strany 14 - Figure 38

6Figure 15Figure 14Figure 17Figure 16side panelsecurity lockraise release latchsound portsscrewport access coverscrewGeneric G4 model shownInstallatio

Strany 15

7Figure 21Figure 20Figure 18Figure 19fan assemblyclipclipclip (grasp here) clip (grasp here) processor card2-pin connectorheat sinkprocessor cardscrew

Komentáře k této Příručce

Žádné komentáře

Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card. Sonnet Technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card