Sonnet-technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade Uživatelský manuál stáhnout pdf

ENCORE

™

ST G4

Processor Upgrade Card for Power Mac

G4 AGP Graphics

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.

Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com

Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350

©2002 Sonnet Technologies, Inc. Revised 2005. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype and Encore are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks

of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.

QS-SG4-1200_1400-E-A-052605

Support Notes: Please familiarize yourself

with the following instructions before beginning

the installation. If you feel you are unable to install the

computer hardware, please contact a qualified com-

puter technician. Sonnet strongly recommends that a

qualified technician perform this installation.

Before proceeding with the installation, we recommend

that you make a backup of important information on

your hard drive prior to installing new hardware or soft-

ware.

Installation Instructions

Power Mac and Operating System Compatibility

This Encore/ST G4 processor upgrade card is compatible only with Power

Mac

G4 AGP Graphics, Gigabit Ethernet, Digital Audio, QuickSilver 2001, and

QuickSilver 2002 models. Installation of this product into a Power Mac G4 Cube is

not supported. If you are unsure which Power Mac model you have, refer to

Apple’s online support article that describes the differences at

http://docs.info.apple.com/article.html?artnum=58418. This article lists

model numbers, and describes the physical differences of the various

Power Mac G4 models.

At this printing, this Encore/ST G4 processor upgrade is compatible with Mac

9.2 through Mac OS X Version 10.4 and later. For up-to-date Mac OS com-

patibility information, check our web site.

The Encore/ST G4 supports hard disk and display sleep in all compatible Power

Mac G4 computers; in some conﬁgurations, deep sleep may not be supported.

You Should Have

The following items should be included in your product package:

• Encore/ST G4 processor upgrade card*

• Sonnet Installer CD

The following items are required for installation:

• Medium Phillips screwdriver

• Flat blade screwdriver (only for installation in QuickSilver models)

• Needle-nose pliers

Multiple Upgrade Recommendation

If you intend to perform multiple hardware upgrades to your Power Mac, we

recommend that you complete the installation of the Encore/ST G4 ﬁrst, and

then install the remaining upgrades; complete each upgrade and test it before pro

ceeding to the next.

* Your card may differ from what is pictured.

WARNING: In order for this Encore/ST G4 to operate

in your system, it must have the latest Apple Power

Mac G4 firmware and Mac OS 9.2 installed. If your system

does not meet these criteria, you must install Mac OS 9.2 and

update your system’s firmware before installing this upgrade.

Otherwise, your system may not operate properly with the

Encore/ST G4 installed. Instructions follow.

1 2 3 4 5 6 ... 14 15

Shrnutí obsahu

Strany 1 - G4 AGP Graphics

ENCORE™/ST G4 Processor Upgrade Card for Power Mac® G4 AGP GraphicsRemember to register your product online at http://registration.sonnettech.com to

Strany 2

8Figure 21Installation—Digital Audio ModelsInstall Encore/ST G4 Processor Upgrade Card 1. Remove the Encore/ST G4 processor upgrade card from its ant

Strany 3 - Software/Firmware Info

9Figure 25Installation—Digital Audio ModelsClose Computer 1. Raise the side panel back into place (Figure 25). 2. Return the computer to your compu

Strany 4 - Necessary

10Figure 29Figure 28Figure 27Figure 26security lockport access coverside panelraise release latchscrewscrewInstallation—QuickSilver 2001 and 2002 Mode

Strany 5 - AGP Graphics/Gigabit Ethernet

11Figure 33Figure 32Figure 31Figure 30screwheat sinkscrewprocessor cardclipclipprocessor cardscrewfan assembly2-pin connectorprocessor cardInstallat

Strany 6 - Remove Processor Card

12Figure 35Figure 34Installation—QuickSilver 2001 and 2002 ModelsInstall Encore/ST G4 Processor Upgrade Card 1. Remove the Encore/ST G4 processor upg

Strany 7

13Figure 39Installation—QuickSilver 2001 and 2002 ModelsReinstall Fan Assembly and Close Computer 1. Place the fan assembly between the Encore/ST ca

Strany 8 - Shut Down and Open Computer

Strany 9

1Software/Firmware InfoSoftware and Firmware Installation/Update Info Figure 2firmware versionFigure 1firmware versionA. AGP Graphics, Gigabit Ethern

Strany 10 - Figure 24

2 4. Press and hold down the Programmer’s button (the button on the right, beneath the Power button) on the front of your computer. 5. While holdin

Strany 11 - Digital Audio

3This section covers the installation of the Encore/ST G4 into Power Mac G4 AGP Graphics and Gigabit Ethernet models. If you are install-ing this prod

Strany 12 - Remove Fan Assembly

4Figure 8Figure 7screwscrewprocessor cardscrewanti-static packageEncore/ST G4 cardInstallation—AGP Graphics and Gigabit Ethernet ModelsRemove Processo

Strany 13 - QuickSilver 2001/2002

5Figure 12Figure 11Encore/ST cardscrewscrewInstallation—AGP Graphics and Gigabit Ethernet Models 5. Making sure the Encore/ST card’s captive screws a

Strany 14 - Figure 37

6Figure 14Figure 13Figure 16Figure 15side panelsecurity lockraise release latchsound portsscrewport access coverscrewGeneric G4 model shownInstallatio

Strany 15

7Figure 20Figure 19Figure 17Figure 18fan assemblyclipclipclip (grasp here) clip (grasp here) processor card2-pin connectorheat sinkprocessor cardscrew

Komentáře k této Příručce

Žádné komentáře

Sonnet-technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Sonnet-technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade. Sonnet Technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade Card User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Sonnet-technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade